ZG-0.5L Laboratory Ƙananan ruwa mai sanyaya mahautsini

1. ƙimar ɗakin mahaɗa: 0.3L-0.5L
2. babban mota: AC motor, power 3.7 kW.
3. Mai ragewa: tushe da firam ɗin suna ɗaukar tsarin walƙiya na ƙarfe na carbon, gami da tsarin keɓewa na lubrication.
4. Rotor: kaifi biyu, tsarin rotor synchronous (kuma ana iya tsara shi da ƙera shi gwargwadon zane-zanen tsarin rotor da mai amfani ya bayar), kafin da bayan rabo na rotor na 1: 1.20 ko ST synchronous rotor takamaiman sigogi za a iya keɓance su gwargwadon buƙatun abokin ciniki kyauta, simintin ƙarfe na baƙin ƙarfe da jiyya mai ƙarfi, murfin murfin chromium mai ƙarfi; hali ga ball-shaft abin nadi bearings; ɗaukar wanka mai lubrication; rotor mafi Girma: 0.5L: 36 RPM / RPM ana iya tsara shi kyauta.
5. bangon fuska: tsarin ƙarfe, dumama hakowa, tauraron chrome plating a ciki.
6. sashi: tsarin ƙarfe, tauraron chrome plating a ciki.
7. filogi na sama: silinda ke motsawa, plating chrome mai ƙarfi a farfajiya.
8. hatimin fuska: kayan zoben hatimin abu ne mai tsayayyiyar lalacewa, mai shafawa kai, hatimin saman bazara.
9. cajin hopper: aikin hannu
10. yanayin sarrafawa: fashewar aiki, Semi-atomatik.
Mafi yawan zafin jiki na mahautsini shine +10- a zazzabi na al'ada.
Jiki na inji
11. ginshiƙan ginshiƙan yana walƙiya ta hanyar ƙirar ƙarfe da farantin karfe.
12. tankin hadawa an yi shi da karfen alloy mai jurewa.
Bango na gefe an yi shi ne da ƙananan ƙarfe na carbon.
13. amfani da karafan karafa don hada shaft da ruwa.
14. an yi shinge mai ɗauke da ƙarfe na ZG20, kuma ana amfani da bearings rollers.
15. Na'urar ciyarwa Wannan injin an ƙera shi azaman na'urar ciyar da gaba, ana iya daidaita matsin lamba gwargwadon bawul ɗin mai amfani.
16., gefen juji mai jujjuya na na'urar da ke hana ruwa yana tilasta ta hatimin injin injin, kuma ana ba da tsarin rigakafin ɓoyayyiyar lasisin ƙasa.
Na'urar murfin matsawa
17. Ƙarfin matsin lamba da aka yi da ƙarfe gami, ana amfani da matsin lamba akan albarkatun ƙasa a cikin aikin hadawa, tare da silinda na iska don motsi sama da ƙasa
Ana sauke na'urar
18. Fitar da huhu na huhu a cikin ɗakin hadawa
19. matsakaicin karkatar kusurwa shine digiri 110 zuwa 135.
20. karkatar da wuta: silinda aka kora
Tsarin watsawa
21. babban mota 3.7KW AC voltage yana da 440V 415V 380V 220V 110V ana iya zaɓar shi gwargwadon buƙatun abokin ciniki.
22. Yanayin watsawa: babban mota da mai ragewa suna haɗa drive.
bututu
23. bututun matsawa na iska, matattarar iska mai matsewa (haɗin maki uku, bawul ɗin soloid) da bututun jikin injin.
Babban kayan sarrafa wutar lantarki
24. saitin zafin jiki: duka atomatik da manual.
25. akwai ayyuka na gaggawa, saitunan lokaci daban -daban, ƙararrawa, juzu'i masu kyau da mara kyau ana iya gane su.
Amfanin dandamali na inji
26. manyan abubuwan haɗin wutar lantarki samfuran shigo da kayayyaki ne, kuma duk jigon mashin ɗin alama ce ta TWB.
27. ana amfani da ƙarfe na ƙarfe don motsa shaft. Yana da sauƙi a saka sassan don ƙara Jamus Jamus da aka shigo da ƙarfe mai jurewa, wanda ya fi tsayi da ɗorewa.
28. Haɗa nau'in “dutsen”, babban kayan hadawa da kwanon rufi an yi shi da ƙarfe mai ƙyalƙyali mai lalacewa, kuma ɓangaren sausaya yana hawa da walda baƙin ƙarfe na Yammacin Jamus.
Na'urar kare kariya ta bango ta 29. tana ɗaukar kayan fasaha masu yawa: tsarin rigakafin yoyo ya ci lambar ƙasa.
30. ana amfani da tsarin "M" don gland don sa cakuda ta zama mai daidaituwa kuma ta cika sosai.
31. ƙarar: (W * D * H) 1150 * 500 * 1580MM
32. nauyi: 165KG

Saduwa:
TEL: (+86) 153 8283 6112 Email: brotherc@163.com