ZG-5T Laboratory Small Vacuum Vulcanizing Machine [Touch Screen]

Product advantages: automatic rise, automatic constant pressure, automatic constant temperature, automatic water intake, automatic completion of multi-stage pressure time, automatic heating in constant pressure state, automatic cold cutting, automatic reduction of vacuum pumping degree to - 0.99 pressure, and can be automatically maintained.

Features: High performance oil pressure system, with automatic pressure compensation function, can preset the time and pressure of one pressure and multiple pressure. High precision, high wear-resistant guide pillar, strong load force, stable lifting; using imported technology to deal with electric heating plate material, high temperature resistance, corrosion resistance, fast heat transfer, no deformation. Humanized oil circuit design, when the instrument is in a long period of holding pressure or non-working state, it will automatically enter the shutdown holding pressure or delayed shutdown, and when it reaches the set time, it will automatically pressurize or relieve pressure. Fully satisfied with GB6038

The raw materials are placed in the casting mould and clamped between the electromechanical heating plates to form the raw materials for testing, which can be used as the basis for mass production of batching materials in the factory.

Volume: 0.5-5T arbitrary adjustable (other requirements can be customized according to customers)

2. Temperature Range: Normal Temperature to 300 C (Standard Configuration Temperature)

The highest temperature has been done at room temperature - 300 500 760 C (three grades can be used first, high temperature can be used as low temperature)

3. Temperature Controller: Precision Module, with PLC Control

4. Timer: LED display, time range 0.1S-99min-9.9hr

5. Temperature control mode: P.I.D mode microcomputer control performance is stable, accurate temperature control.

6. Heater: Heating die built-in cylindrical, hole position scientific cooperation, fast heating, long life, easy maintenance

7. Warming-up time: It takes about 15 minutes from room temperature to 170 C (other warming-up time is customized free of charge)

8. Hot pressing plate: 300 *300mm high temperature resistant SKD imported steel plate, surface carbonization and quenching, fast heat conduction, parallel pressure invariant.

9. Cold pressing plate: 300 *300mm inner hot plate area through tap water-cooled shear plate can be customized according to customer needs

10. There are two layers of hot plate and two layers of cold plate. The number of cold plate and hot plate layers can be customized according to customers'needs.

11. Heating System: PID Intelligent Control

12. Cooling mode: tap water cooling

13. Cooling Temperature Range: Normal Temperature to Water Temperature

14. Hydraulic pressure system: hydraulic flow closed-loop control system, GPY oil pump driven high-performance electro-hydraulic matching high-precision non-resistance cylinder piston execution equal-speed control mode, with pressure automatic compensation function. The time of primary and secondary pressure can be predicted, the load force is strong, the rise and fall is stable; automatic pressure, pressure holding and pressure relief.

15. Cylinder stroke: Max 180mm cylinder stroke can be customized according to customer needs

16. Cylinder Rate: 11mm/s Cylinder Rate can be customized to customer needs

17. Pressure gauge: 0-210 kg/sq.cm

Volume of 18 Hydraulic Main Engine: (W *D *H) 1100 *550 *1500 mm

19. Power supply: 3, AC380V, 19A

20. Weight: about 690 kg (with casters propelled arbitrarily)

21. Vacuum pump pumping degree is - 0.99 MPa, and can be automatically maintained, constant high vacuum.

Contact:
TEL: (+86) 153 8283 6112 Email: brotherc@163.com