Brand:Xihua
Mini Order:1Set
Supply:15Set
deliver goods:Within 30 days
Model No.: XNR-400AM
XNR-400AM melt flow rate meter is based on GB3682-2000, Test Methods for Determination of ISO1133 thermoplastic flow properties at high temperature instrument, which uses a microcomputer (MCU) control, Chinese user interface, automatic test results; for polyethylene (PE), polypropylene (PP), polyoxymethylene (POM), polystyrene (PS), ABS plastic, polycarbonate melt flow rate measurement (PC), etc. at a high temperature can be measured MFR value (quality Act)
Testing parameters:
Ø Measuring range :0.1-400.00g/10min(MFR)
Ø Precision of temperature control: room temperature - 400°c
Ø Precision of temperature: ±02°c
Ø Precision of timepiece: 1s
Ø Load: Full load
Ø Cutting mode: Manual ,by time
Ø Temperature recovery time: less than 4 minutes
Ø Cut material number : 1-99
Ø Cut material time interval : 10-600 seconds
Ø Holding time: ten thousand hours of continuous work
Ø Cavity die: Tungsten carbide, L 8.000mm±0.025mm
internal diameter Φ2.095mm ±0.005mm
Ø Screw barrel internal diameter: Φ9.550mm ± 0.025mm
Ø Screw barrel length: 152± 0.1mm
Ø Cavity die: Tungsten carbide, L 8.000mm±0.025mm,
internal diameter 2.095mm ±0.005mm
Ø Power:0.45KW
Ø Power supply: AC220V±10%,50Hz
Ø Dimension: 400mm X 500mm X 600mm
Weight: 60kg