I am going to open an online shop for handmade soap. Here are my questions:
1. I need a very small amount of silicone molds, but I think they are too ugly on the Internet. I hope to customize them. If possible, please introduce a few of them~
2. I am not very sure what the customized price is
3. The amount is too small, can the merchant do it, tears rush

No best answer

1. Stir the silicone and curing agent evenly. The appearance of mold silicone is a flowing liquid, component A is silica gel, and component B is curing agent. Example: Take 100 grams of silica gel and add 2 grams of curing agent. (Note: The silicone and curing agent must be stirred evenly. If the mold is not evenly stirred, one part of the mold will be cured, and the other part will not be cured, and the silicone will dry and cure unevenly. It will affect the service life of the silicone mold and the number of mold turnovers, and even cause the mold to be scrapped.
2. Vacuuming and degassing: After the silica gel and curing agent are evenly mixed, vacuum and degas the bubbles. The vacuuming time should not be too long. Under normal circumstances, it should not exceed ten minutes. If the vacuuming time is too long, the silica gel will be immediately Curing produces a cross-linking reaction, which makes the silica gel become piece by piece and cannot be brushed or poured. This wastes the silica gel. You can only pour the silica gel into the trash can and take the silica gel again to make it.
3. Brushing or operation process: the silica gel that has been evacuated and drained of bubbles is brushed or poured. Pour it on top of the product (Note: The product or model to be copied before pouring the silica gel must be coated with a release agent or release agent). Then apply the silica gel on the product. The application must be even. After 30 minutes, paste a layer of gauze and weft cloth to increase the strength and tensile force of the silica gel. Then apply a layer of silica gel, and then paste a layer of gauze fiber weft cloth, so that it will be fine after two times. Only by doing so, the service life of the opened silicone mold and the number of turning molds will be relatively increased, which can save costs and improve efficiency.
4. The production of the outer mold: The generally used method and material is to surround the mold with rubber sheets or wooden boards. Once the mold cabinet is filled with plaster, it is enough to use the resin painting method, painting Paste a layer of glass fiber cloth on one layer of resin, brush and paste, and repeat two or three layers to complete the outer mold of the mold.
5. The operation method of filling mold or pouring mold: filling mold or pouring mold is used for relatively smooth or simple products. There is no mold line to save labor and time, which is to use plastic sheet or glass for the product or model you want to copy. Surround the board, pour the vacuumed silica gel directly onto the product. After the silica gel is dried and formed, take out the product and the mold is formed. , Will not damage the products in the silicone mold)