What kind of experience is it to have a 3D printer and build your own model to print out your favorite model?
What's more, I also want to ask, what's the cost of maintaining 3D printers and printing materials.
What kind of experience is it like to print out your favorite model in 3D?
attention:115 answer:1 offer a reward:0
Away from the problem with
- Unsolveddestoon
- 2021-07-11 22:59
Best answer
No best answer
All the answers
- 1Flooranonymity
- 2021-08-06 11:35
1.First of all, 3D printing is a printing technology that has only recently appeared, so that when we print, we are not 2D printing, but three-dimensional. Three-dimensional is actually more difficult in printing. Need to consider the length, width and height. So in fact, we need to calculate more things, and we also need to consider more issues. Therefore, we have to consider all aspects. In this way, we need to master a lot of knowledge.
2.Secondly, using 3D printing technology is also a very difficult operation. We need to buy the facilities, then deploy them, and then operate them. We must also pay attention to whether there will be ink clogging and whether there will be any accidents in the program. We have to do calculations so that we can better control the print head. Let us get a good finished product.
3.Finally, we need to know that 3D printing technology is actually a technology that needs to be learned for a long time. It is possible that there may be many failures just because of this. It is because of this that we have to study hard. It is destined to be difficult. We also have to Learn those things. Although it is a little difficult to master, we still have to learn it well so that we won't make mistakes when using it.
The cost of maintaining 3D printers and printing materials:
A little bit of precision is required. The diameter of a normal FDM extrusion is 0.2mm (if the precision is 0.1mm, the printing time x 4 times), the speed can be adjusted, but for the basic quality, the maximum is tens of millimeters per second. It can print a few grams per hour. It costs only 50 yuan for 1 kg of materials, but it takes days and nights to finish printing. How much electricity and labor costs are needed (for occasional attention, inspection, maintenance of the printer, and reprinting if the model is broken).SLA is much faster and more suitable for decoration. However, it will smell and be toxic, and it must be ventilated, and the material is relatively brittle. I don't know the specific speed value, but the price of online agency printing is slightly higher than that of PLA. It is estimated that the overall cost is not much .
2.Secondly, using 3D printing technology is also a very difficult operation. We need to buy the facilities, then deploy them, and then operate them. We must also pay attention to whether there will be ink clogging and whether there will be any accidents in the program. We have to do calculations so that we can better control the print head. Let us get a good finished product.
3.Finally, we need to know that 3D printing technology is actually a technology that needs to be learned for a long time. It is possible that there may be many failures just because of this. It is because of this that we have to study hard. It is destined to be difficult. We also have to Learn those things. Although it is a little difficult to master, we still have to learn it well so that we won't make mistakes when using it.
The cost of maintaining 3D printers and printing materials:
A little bit of precision is required. The diameter of a normal FDM extrusion is 0.2mm (if the precision is 0.1mm, the printing time x 4 times), the speed can be adjusted, but for the basic quality, the maximum is tens of millimeters per second. It can print a few grams per hour. It costs only 50 yuan for 1 kg of materials, but it takes days and nights to finish printing. How much electricity and labor costs are needed (for occasional attention, inspection, maintenance of the printer, and reprinting if the model is broken).SLA is much faster and more suitable for decoration. However, it will smell and be toxic, and it must be ventilated, and the material is relatively brittle. I don't know the specific speed value, but the price of online agency printing is slightly higher than that of PLA. It is estimated that the overall cost is not much .