Our Rubber Lining Scope Business
-
Design, Fabrication, Control and Application
-
Technical Assistance Service
-
Customized solutions for each problem presented
Rubber lining at Ha Thanh shop
-
We can vulcanizing the large pipe/vessel with size under ID 4mx10mmL in our large autoclave (ID. 4mx12mL)
-
Removing the lining if necessary by induction, by pyrolysis or manually
-
Preparation of the surface by grit blasting
-
Applying internal and/or external lining
-
Vulcanization in steam pressure Autoclave or in self-vulcanization
-
Painting
-
Finishing
Rubber lining Onsite work
Our experienced personnel are qualified to work on-site with equipment of any size by providing. We provide several services
-
Removing existing lining with pneumatic/electric material or with the Magnetic Induction System
-
Preparation of the surface by sanding, scraping or grit blasting
-
Applying lining
-
Rubber lining
-
Flake lining
-
Painting
-
Pressure vulcanization or Exhaust steam
-
Self - vulcanization
|
Rubber Lining Product
|
Rubber Lining Product
|
-
Pipes
-
Storage Tank
-
Pickling Tank - Pickling resin tank - Pickling Line (EGL)
-
Degreasing Tank
-
Plating Tank
-
Gypsum Reactor
-
Ion Exchange Tower
-
Thickener
-
Hydrochloric Acid Tank (HCL Tanks)
-
Desalination System
-
Pure Water Production System
-
Phosphoric Acid Equipment (H2SO4 Tank, Pipe…)
-
Phosphoric Acid Condenser
-
High Analysis Compound Fertilizer
-
Water Box Condenser
-
Incineration Plant
-
Wet Flue Gas Desulfuration Systems (FGD) plants (i.e scrubbers, piping, agitators and process vessels).
-
Sea water pipe
-
Sand filter for Salt Water
-
Brine Sand Filter
-
Media filter vessel
-
Sea Strainer
-
Header Manifold
-
Rake for thickener
-
Brine Receiver
-
Brine Shower Pipe
-
Metal Crash Cylinder
-
Water Box Cap
-
Dechlorinator
|
-
Caustic Soda Tank (NaOH tank)
-
Anion / Cation / Mixed bed Vessel
-
Equipment for the transport and storage of chemical compounds
-
Treatment of gases and fluids
-
Iron-and-steel and metallurgic industry
-
Mineral treatments
-
Launder equipment
-
Attrition Scrubbers
-
Transport of dangerous materials (HCl, PAC, NAOCl, H2SO4)
-
Paper industry
-
Naval and fishing sector
-
Piping
-
Washer / Cleaner machine
-
Barrel washer
-
Offshore pipe
-
Offshore riser clamp
-
Chemical vessel
-
Chemical transportation
-
DAP units
-
Cartridge Filter
-
Metal Structures
-
Filtrate Plate
-
Centrifugal Separator
-
Heat Exchanger for sea water
-
Agitator
-
Rapid Cooling Tank for Incineration
-
FGD Circulation Pipe
-
Limestone Slurry Pipeline
-
Limestone tank
|
We provide rubber sheet, adhesive, materials and supervisor for rubber lining as Natural HARD rubber: E-5, E-5I, E-7, E-7I, E-8, E-15, E-16, E-18, E-20; Natural SOFT rubber: R-4, R-5, R-6 (R-16), R-7 (R-17), R-8 (R-18), R-8L; BUTYL Rubber B-5 (B-15), B-5C (B-15C), B-5S, B-7(B-17), B-115, B215; Chloroprene Rubber C-5, C-55, C-55F, C-6 (Neoprene), H-411; SPECIAL MATERIAL (EPDM) S-2, S-6, SPECIAL MATERIAL (NRP) N-8.
Our GLASS FLAKE Coating Business
We offer support in material selection and qualification. And we sales glass flake lining materials base resin Epoxy, Vinylester, Novolak - Type Vinylester, Polyester, Epoxy Novolak, Hybrid Novolak, Het Acid Polyester, Bis-Type Polyester.
Following diagram shows typical OHJI-FLAKE material and its feature.
|
Flake Resin Characteristics
|
Advantage of Flake Lining
|
|
● Chemical resistance
● Solvent & Organic acid resistance
● Heat resistance
● Blister resistance
● Thermosetting
|
● Easy to apply
● No need to cure
● Strong bonding Lining Characteristics
● Easy to repair
|
● FLAKE 100 SERIES (Heavy corrosion purpose, Thick type)
• Thickness: Avg. 2mm (2coats)
• Method: Trowel
• Application: FGD Duct & Tank, Water Treatment Equip, Chemicals Tank
|
Chemical tank Grade
|
Base resin
|
Feature
|
|
HF‐161
|
Bis type Vinyl ester resin
|
Standard (100℃ liquid）
|
|
HF‐181
|
Novolac type Vinylester resin
|
Heat resistance （150℃ gas）
|
|
HF-141
|
Het acid Polyester resin
|
For oxidizing chemicals
|
● FLAKE 200 & 300 SERIES (Light corrosion purpose, Thin type Heavy corrosion purpose, Thick type)
• Thickness: Avg. 800μm (200series)
Avg. 400μm (300series)
• Method: Spray or Roller
• Application: Oil tank, Seawater Pipe, Ocean construction
|
Chemical tank Grade
|
Base resin
|
Feature
|
|
HF‐261
|
Bis type Vinylester resin
|
Standard (60℃‐liquid）
|
|
HF‐281
|
Novolac type Vinylester resin
|
Heat resistance （150℃ gas）
|
|
Chemical tank Grade
|
Base resin
|
Feature
|
|
HF-341
|
Het acid Polyester resin
|
For oxidizing chemicals
|
|
HF-361
|
Bis type Vinylester resin
|
Standard (55℃ liquid）
|
|
HF-381
|
Novolac type Vinylester resin
|
Heat resistance (150℃-gas）
|
Product Categories